RT-204

On the AirTies website, select support pages, find your product and download the Easy Installation Software.

On the AirTies website, select support pages and find your product then download your user manual

Open a web browser (e.g. Internet Explorer, Mozilla Firefox, Netscape) and type http://192.168.2.1 in the address line. This will bring up your router’s web interface.

Even though it is not required by law to repair a product that fails as a result of not following the User Manual guidelines, following its principle of unconditional customer satisfaction, AirTies will make every effort to fix the problem at no charge.

You need to use an AirTies Wireless Access Point that supports AirTies MESH technology to extend your wireless coverage. The details of the products that support AirTies MESH Technology can be found at AirTies web site

Check the splitter and cable connections for your router. The hardware connections should be done as explained in the User Manual and Easy Installation CD. If the connections are made correctly, contact your ADSL service provider and report the problem.

YES. AirTies products are designed and developed based on the latest technology. You will need to find out the ADSL line parameters (VPI, VCI values, PPPoA/PPPoE encapsulation mode..) used in the country you would like to use your router.

To block the use of programs such as ICQ, MIRC, MSN Messenger, Yahoo Messenger, you need to use 3rd party Firewall or Proxy software.

If you have forgotten the password you have defined for logging in to your router using the web interface, you need to reset your router to factory defaults. By going back to factory defaults, all other settings that you may have configured (DSL, Wireless, LAN settings) will also be erased. To reset your router, press and hold the “Reset” button on the back panel for 5 seconds while your router is on. You can then login to the web interface by leaving the password field blank, and reenter all your settings.

AirTies Mesh Network, is a technology that resolves the weak and lost signal problems in multi-story concrete buildings and provides high performance wireless communications. With AirTies wireless routers, you can access the internet anywhere and also expand your wireless coverage area as much as you wish. AirTies Mesh Network consists of a wireless ADSL gateway and one or more access point devices (such as AirTies AP-300, AP-301, AP-400, WOB-200) connected to it wirelessly. The access points function as repeaters and communicate with each other via a special protocol that maintains the signal strength over long distances and through barriers such as concrete walls. Wireless devices connect to the access point that is closest to them. This way, the AirTies wireless devices resolve the wireless signal strength problems (due to barriers, walls or long distances) that may affect internet access and wireless communications.

Install the ADSL Utility Program that is on the CD included with your router on your computer. When you run the program, you will see the “ADSL Usage Monitor” on the main menu. This displays your monthly ADSL usage (download and upload) and your current download rate.

Our outdoor device, WOB-200, is designed for this purpose. WOB-200 is offered with two antenna choices: 7 dBi omni-directional antenna for wireless hotspots and 9 dBi directional antenna for point-to-point connections. Depending on the type of antenna, WOB-200 can be a bridge connecting two points that are 3 km apart, or it could form a wireless hotspot with a 1.5 km radius.